ICON ROCKLEAR AFTERCARE INSTRUCTIONS:
ICON ROCKLEAR is fully cured in a minimum of 30 days.
DO NOT wash the vehicle for 7 days after application/installation. Keep it dry. Avoid washing or letting it get wet (light rain is okay). If it gets rained on, don’t wipe it or anything – let it air dry.
DO NOT apply pressure or rub the coated surfaces for the first 30 days.
ALWAYS Avoid the use of wash brushes: spinning brush, handheld brush, automatic car washes, and any automatic car wash that touches your vehicle with a mitt, pad, brush, etc. (very abrasive debris can get stuck on these and cause damage)
NO waxes, films, coatings, or polishes on the coated surfaces for 30 days after application.
KEEP away from contaminants such as but not limited to: fuel, brake cleaner, airborne gasses (welders) etc. for 7 days after application.
DO NOT apply pressure or rub the coated surfaces for the first 30 days.
ALWAYS Avoid the use of wash brushes: spinning brush, handheld brush, automatic car washes, and any automatic car wash that touches your vehicle with a mitt, pad, brush, etc. (very abrasive debris can get stuck on these and cause damage)
NO waxes, films, coatings, or polishes on the coated surfaces for 30 days after application.
KEEP away from contaminants such as but not limited to: fuel, brake cleaner, airborne gasses (welders) etc. for 7 days after application.
Ask your certified installer if you have any further questions.
MAINTAINING YOUR ICON ROCKLEAR COATING
Wash regularly with pH-neutral automotive soap and water. Hand washing is recommended. Avoid automatic or brush car washes to prevent scratches.
